Customer Enquiries
01743 818 366
Expandacom uses:
- Construction site accommodation
- School / college classrooms,
- Laundry rooms,
- Workshops,
- Insulated stores
- Park offices,
- Highway offices,
- Gatehouses
- Military check points,
- Club houses,
- Scout & guide meeting rooms,
- Observation posts,
- Sleeping accommodation,
- Workers rest / sleep rooms,
- Security kiosks.
Ideal for use in restricted city centre locations – London, Birmingham, Manchester etc.
Supplied and delivered throughout mainland UK (Britain).
Assembly service available in some areas
EXPANDACOM – GENERAL DESCRIPTION
The
prefabricated Expandacom is an insulated closed volume demountable
accommodation unit, designed for use in very restricted areas above
and below ground. Assembly is simple, and is achieved by mounting
the sandwich panels and components into the steel frame and chassis,
requiring only manpower.
The unit comes with 1 x door panel and 2 x window panels as
standard. These panels can be placed anywhere within the frame in
order to design different configurations. Additional windows/doors
can be placed within the structure.
Dimensions:
Length: 6020mm Width: 2305mm Height: 2590mm Ceiling height: 2375mm Wall thickness: 50mm
WALL PANELS
50mm sandwich panels consisting of two .40mm powder coated
galvanized steel sheets with 50mm high density (16 kg/m3)
polystyrene insulation. Colour: Off-white (RAL 9002)
ROOF PANELS
As per wall panels.
Roof Structure
Ceiling supporting frame consists of a rigid and torsion resistant
cold formed 1.50 mm supporting frame, (retention bars) powder coated
in off-white (RAL 9002) which locate into spiggots in the four
corners of the 3mm corner posts. The outer roof skin is in two
parts, and consists of .73mm box profile galvanized steel complete
with integral gutters. The roof structure has an evenly
distributed load capacity of100 kg/m˛.
CHASSIS
The floor consists of a steel structure reinforced to satisfy
bearing capacity and rigidity requirements. Flooring is fixed on top
of the bearing structure composing of 12mm Cement particle board on
which 2 mm thick PVC linoleum covering is laid over. (Flash point B1
– difficult to burn, smoke density Q1)
Chassis Structure
Chassis supporting frames and structure are manufactured from 3mm cold formed galvanized steel profiles . Vertical profiles are 1.5 & 2mm cold formed powder coated black steel profiles. The chassis can be split into five parts if required. No insulation in chassis.
Load Capacity
Floor structure has 250 kg/m˛ evenly distributed load capacity. Deflection is L/300 when placed directly onto level ground.
DOOR & WINDOWS
Apertures are cold formed powder coated 1.23 mm galvanized steel.
The door is 0.73 mm powder coated galvanized flat steel formed into
a sandwich panel with 50mm honey comb insulation c/w with all door
furniture and euro cylinder lock.
Windows: uPVC double glazed window with vacuum sealed unit
(4+10.5+4), inward opening with locking handle. 805 x 1135mm.
FASTENING ELEMENTS
All nuts, bolts, and interconnecting trim are included in the
package. To stack/link you will require additional add-on ‘kits’
that are available from your dealer.
PACKING
All components of the Expandacom are packed to ensure that they are
not damaged during transportation, loading and unloading under
normal circumstances. The smallest transportation cube is achieved
in this packing process.
SPARE PARTS
All components are replaceable. Additional window and door panels can be added to the original structure at any time.
Due to our continuous product development programme we reserve the
right to change the specification without prior notice.
Expandacom is not designed to comply with U.K Building Regulations
approval.